Benutzer-Werkzeuge

Webseiten-Werkzeuge


freifunk:server:gw1.batman

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
freifunk:server:gw1.batman [2021-02-12 19:50] kwasirfreifunk:server:gw1.batman [2021-02-17 18:58] (aktuell) – [Debugging] kwasir
Zeile 1: Zeile 1:
 +====== Administration GW01.Batman ======
 +Alles die Administration von [[freifunk:server:GW1.Batman]] betreffend.
 +
 +Es ist das Paket [[http://packages.debian.org/wheezy/etckeeper|etckeeper]] mit Git als Backend installiert um den Vorteil einer Versionsverwaltung für ''/etc'' zu haben. Nach administrativen Aufgaben einfach kurz 
 +
 +  sudo etckeeper commit
 +
 +und kurz eine Commit Message eingeben. Das Repository ist ausschließlich lokal vorhanden und wird nicht nach draußen gepusht!
 +
 +===== Administratoren =====
 +(aka Nutzer mit sudo Rechten)
 +  * [[user:tux]]
 +  * nold
 +  * kwasir
 +  * 
 +
 +===== Installierte Dienste =====
 +  * Node-Exporter
 +  * ISC-DHCP Server
 +  * Bird & Bird6
 +  * FASTD == > [[freifunk:gateway:example#fastd]]
 +  * alfred
 +  * unbounds
 +----
 +
 +===== FASTD ===== 
 +
 +==== Debugging =====
 +^Command ^Description^
 +|batctl o  |Show Originators|
 +|batctl nn | show nc_nodes |
 +|batctl bbt| backbonetanle|
 +|batctl ping  1e:34:a8:d3:0a:eb| ping device|
 +
 +
 +===== Bird/ Bird6 =====
 +
 +
 +bird ist eine Open-Source-Implementierung eines IPv4 als auch IPv6-fähigen TCP/IP-Routing-Daemons. Derzeit unterstützt BIRD mehrere interne Routing-Tabellen, das EGP BGP, die IGPs OSPF und RIP sowie statische Routen. 
 +
 +https://bird.network.cz/?get_doc&v=20&f=bird-4.html
 +
 +==== Debuuging ====
 +bridc => IPv4
 +birdc6 => IPv6
 +=== Show Status ===
 +  # birdc show status
 +  BIRD 1.3.7 ready.
 +  BIRD 1.3.7
 +  Router ID is 10.139.0.9
 +  Current server time is 14-02-2021 19:42:33
 +  Last reboot on 11-02-2021 22:19:21
 +  Last reconfiguration on 11-02-2021 22:19:21
 +  Daemon is up and running
 +
 +=== Show Interfaces ===
 +== IPV4==
 +  # birdc show interfaces 
 +  BIRD 1.3.7 ready.
 +  lo up (index=1)
 + MultiAccess AdminUp LinkUp Loopback Ignored MTU=16436
 + 127.0.0.1/8 (Primary, scope host)
 +  eth0 up (index=2)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
 + 37.120.160.206/22 (Primary, scope univ)
 +  gre0 DOWN (index=3)
 + MultiAccess AdminDown LinkDown MTU=1476
 +  backend-bab1 DOWN (index=4)
 + PtP Multicast AdminUp LinkUp MTU=1400
 +  backend-gw2 DOWN (index=5)
 + PtP Multicast AdminUp LinkUp MTU=1400
 +  backend-web DOWN (index=6)
 + PtP Multicast AdminUp LinkUp MTU=1400
 +  mesh-vpn DOWN (index=7)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1312
 +  bat0 up (index=8)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
 + 10.139.0.9/16 (Primary, scope site)
 + 10.139.0.53/16 (Secondary, scope site)
 +  mesh-vpn-backbo DOWN (index=9)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1426
 +==ipv6==
 +  # birdc6 show interfaces 
 +  BIRD 1.3.7 ready.
 +  lo up (index=1)
 + MultiAccess AdminUp LinkUp Loopback Ignored MTU=16436
 + ::1/128 (Primary, scope host)
 +  eth0 up (index=2)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
 + 2a03:4000:6:30c3::1/64 (Primary, scope univ)
 + fe80::5054:6fff:fecf:e3a/64 (Unselected, scope link)
 +  gre0 DOWN (index=3)
 + MultiAccess AdminDown LinkDown MTU=1476
 +  backend-bab1 up (index=4)
 + PtP Multicast AdminUp LinkUp MTU=1400
 + fda9:26e:5805:bab1:af1:7cb:47:af01/127 (Primary, opposite fda9:26e:5805:bab1:af1:7cb:47:af00, scope site)
 + fe80::200:5efe:2578:a0ce/64 (Unselected, scope link)
 +  backend-gw2 up (index=5)
 + PtP Multicast AdminUp LinkUp MTU=1400
 + fda9:26e:5805:bab1:aaaa::5/64 (Primary, scope site)
 + fe80::200:5efe:2578:a0ce/64 (Unselected, scope link)
 +  backend-web up (index=6)
 + PtP Multicast AdminUp LinkUp MTU=1400
 + fd43:c813:cf00:5ed5::4/127 (Primary, opposite fd43:c813:cf00:5ed5::5,   scope site)
 + fe80::200:5efe:2578:a0ce/64 (Unselected, scope link)
 +  mesh-vpn up (index=7)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1312
 + fe80::d0f4:29ff:fe99:6861/64 (Primary, scope link)
 +  bat0 up (index=8)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
 + fda9:26e:5805::9/64 (Primary, scope site)
 + fe80::a8bd:bdff:fe97:6274/64 (Unselected, scope link)
 +  mesh-vpn-backbo up (index=9)
 + MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1426
 + fe80::bc98:1fff:fe07:ff52/64 (Primary, scope link)
 +
 +
 +===Show Protocols===
 +  # birdc show protocols
 +  BIRD 1.3.7 ready.
 +  name     proto    table    state  since       info
 +  k_mast   Kernel   master   up     Feb11       
 +  k_frei   Kernel   freifunk up     Feb11       
 +  device1  Device   master   up     Feb11       
 +  p_maintbl Pipe     master   up     Feb11       => ebgp
 +  p_ibgptbl Pipe     ebgp     up     Feb11       => ibgp
 +  p_freitbl Pipe     ibgp     up     Feb11       => freifunk
 +  unreachable_default Static   freifunk up     Feb11       
 +  static_ffmd Static   ebgp     up     Feb11       
 +  local_ffmd Static   freifunk up     Feb11       
 +  vpn2     BGP      ibgp     start  Feb11       Connect       Socket: Connection   timed out
 +  Bielefeld1 BGP      ebgp     start  Feb11       Idle          
 +  Bielefeld2 BGP      ebgp     start  Feb11       Idle          
 +
 +Procols Verbose
 +  # birdc show protocols all
 +  BIRD 1.3.7 ready.
 +  name     proto    table    state  since       info
 +  k_mast   Kernel   master   up     Feb11       
 +  Preference:     10
 +  Input filter:   REJECT
 +  Output filter:  (unnamed)
 +  Routes:         0 imported, 0 exported, 0 preferred
 +  Route change stats:     received   rejected   filtered    ignored   accepted
 +    Import updates:              0          0          0          0          0
 +    Import withdraws:            0          0        ---          0          0
 +    Export updates:              0          0          0        ---          0
 +    Export withdraws:            0        ---        ---        ---          0
 +=== show static  ===
 +    Show detailed information about static routes. 
 +  birdc show static local_ffmd
 +  BIRD 1.3.7 ready.
 +  10.139.0.0/16 dev bat0
 +  birdc show static static_ffmd
 +  BIRD 1.3.7 ready.
 +  10.139.0.0/16 unreachable
 +
 +
 +===== Openvpn ===== 
 +erzeugt mullvad device
 +
 +==== Starten/ Stoppen ====
 +
 +  service openvpn start
 +  service openvpn stop
 +  
 +  @gw1:# service openvpn status
 +  [ ok ] VPN 'ipredator' is running.
 +
 +==== debugging ====
 +  ps -ef |grep open
 +  root       968   697  0 20:45 pts/2    00:00:00 grep open
 +  root     21285      0 Feb10 ?        00:00:22 /usr/sbin/openvpn --writepid /run/openvpn/ipredator.pid --daemon ovpn-ipredator --status /run/openvpn/ipredator.status 10 --cd /etc/openvpn --config /etc/openvpn/ipredator.conf
 +
 +
 +===== ISC-DHCP Server =====
 +
 +==== Starten/ Stoppen ====
 +
 +  /etc/init.d/isc-dhcp-server stop
 +
 +  /etc/init.d/isc-dhcp-server start
 +
 +  /etc/init.d/isc-dhcp-server status
 +  Status of ISC DHCP server: dhcpd is running.
 +
 +
 +==== Debugging ====
 +
 +  tcpdump -n -i br0 port bootps or port bootpc
 +
 +  root@gw1:/home/kwasir# ps -ef |grep dhcp
 +  root       903   697  0 20:33 pts/2    00:00:00 grep dhcp
 +  root      3296      0 Jan31 ?        00:00:21 /usr/sbin/dhcpd -q -6 -cf /etc/dhcp/dhcpdv6.conf -pf /var/run/dhcpdv6.pid bat0
 +  root     21304      0 Feb10 ?        00:00:21 /usr/sbin/dhcpd -cf /etc/dhcp/dhcpd.conf bat0
 +
 +
 +===== Alfred =====
 +A.L.F.R.E.D - Almighty Lightweight Fact Remote Exchange Daemon
 +<blockquote>alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ...
 +</blockquote>
 +[[https://www.open-mesh.org/projects/alfred/wiki|Alfred]]
 +
 +[[https://www.open-mesh.org/projects/alfred/wiki/Alfred_architecture|Alfred_Architekture]]
 +[[https://github.com/ffnord/alfred/blob/master/README ]]
 +
 +==== Start / Stop/ Staus ====
 +
 +  service alfred start
 +  [ ok ] Starting A.L.F.R.E.D: alfred.
 +
 +  service alfred stop
 +
 +  service alfred status
 +  [ ok ] alfred is running.
 +
 +
 +
 +==== Debugging ====
 +
 +  ps -ef |grep alfred
 +  root      1149      0 21:03 ?        00:00:00 /usr/sbin/alfred -i bat0 -b bat0 -m
 +
 +=== Abfragen ===
 +
 +Sind Nodes online, die gluon-announce installiert und am laufen haben, sollte man json/gzip Daten erhalten:
 +
 +  alfred -r 158 -u /var/run/alfred-wi.sock
 +   [...]
 +   { "xx:xx:xx:xx:xx:xx", "\xxx\xxx [...] \xxx\xxx" },
 +   [...]
 +
 +Ist alfred-json installiert kann man sich die Daten gleich mit entpacken lassen:
 +
 +  alfred -r 158 -s /var/run/alfred.sock -z
 +   [...]
 +   {
 +       "xx:xx:xx:xx:xx:xx": {
 +           "location": {
 +             "longitude": 0.0,
 +             "latitude": 0.0
 +           },
 +           "network": {
 +             "mac": "xx:xx:xx:xx:xx:xx",
 +             [...]
 +          },
 +          [...]
 +       },
 +       [...]
 +   }
 +   [...]
 +
 +Hier nervt: Zur Angabe des Sockets nutzt alfred-json den Flag -s, alfred hingegen -u.
 +
 +
 +
 +Wenn bereits ein Router in der Hood ist, kann mit
 +
 +  alfred -r 158 -u /var/run/xx.sock 
 +
 +
 +[[https://github.com/FreifunkFranken/alfred-json]]
 +
 +  alfred-json -zr 158 -s /var/run/alfred.sock
 +  
 +  alfred-json -zr 158
 +  
 + Datensatz 158 und 159 sollten daten liefern
 +Bzw. Datensatz 1
 +===== Unbound =====
 +
 +==== Starten Stoppen ====
 +  # /etc/init.d/unbound status
 +  [ ok ] unbound is running.
 +  
 +  # /etc/init.d/unbound start
 +  [ ok ] unbound is starting
 +
 +
 +  # /etc/init.d/unbound stop
 +  [ ok ] unbound is stopping
 +
 +===== Changelog =====