Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- projects:2013:blinkedings_ultimate [2013-03-25 19:56] – dkdent
+++ projects:2013:blinkedings_ultimate [2014-09-04 10:54] (aktuell) – korr: markup alex
@@ Zeile 1: / Zeile 1: @@
+====== Blinkedings Ultimate ======
+  ? Maintainer
+  : [[:user:yomin]]
+  ? Date
+  : 25.03.2013
+  ? Status
+  : done
+  ? Resources
+  : [[https://github.com/Yomin/blinkedings_ultimate]]
+  ? Cost
+  : ~7 Euro
+Successor of [[projects:2013:avr_starterkit|Blinkedings Starterkit]].
+Equipped with a FT232RL chip the ATTINY2313 can be flashed via USB and bootloader - no ISP needed anymore.
+Also the chip registers with the USB Host Controller which unlocks up to 500mA to fully utilize the rgb led.
+===== Setup =====
+  * solder all components to PCB
+  * solder ISP header to ISP pads
+  * flash bootloader of your choice (eg [[https://www.mikrocontroller.net/articles/AVR_Bootloader_FastBoot_von_Peter_Dannegger|fastboot]])
+  * remove ISP header
+  * upload your program with bootloader client of your choice (eg [[https://github.com/Boregard/FBoot-Linux|fboot]])
+  * profit
+===== Pics =====
+{{:projects:2013:blinkedings_ultimate:prototyp.jpg?300|Prototyp}}
+{{:projects:2013:blinkedings_ultimate:isp.jpg?300|Flashing the bootloader via ISP (in this hardware revision the ISP pads were wrong connected therefore the ISP is directly soldered to the die pins)}}
+{{:projects:2013:blinkedings_ultimate:final.jpg?300|done}}